1 Item(s) Added to Cart
View CartJ45CP5U4
New
1. WEISS heavy class milling machine for more rigidity and greater cutting ability.
2. Larger travels and work area with 9-1/2" x 32" worktable
3. Big powerful 2 HP (1500W) with R8 spindle taper
4. Six speeds gear drive system with 90-1970 RPM speed, provides easy and reliable operation
5. Super-rigid precision-ground dovetail headstock column and table ways, precision handwheel control for X, Y, and Z-axis
6. All leadscrews are true inch pitch screws, larger dials with 0.001" graduate for easier reading
Want TOP quality? Come to WEISS, you can get the excellent value!
· WMD45 Heavy-Duty Mill/Drill with tapping function
· Spindle is supported by high-precision P5 spindle bearings
· Spindle movement can be monitored on depth ruler in both inch or metric way
· WMD45 precision manual fine down feed can be adjusted with the min. feed rate up to 0.001"
· Six speeds gear drive system provides larger torque and easy operation.
· Gearbox levers make it chang spindle speeds fast and easily.
Reversible spindle & tapping controls
Mill head can be tiltled 45 degrees
Loosen the nuts and the bolt to adjust the mill head angle
Model | WMD45 | |
Max. Drilling Capacity | 45 mm | 17-3/4" |
Max. End Milling Capacity | 32 mm | 1-1/4" |
Max. Face Milling Capacity | 80 mm | 3-3/16" |
Table Size | 800 x 240 mm | 31-1/2" x 9-1/2" |
Cross Travel | 230 mm | 9" |
Longitudinal Travel | 560 mm | 22" |
Spindle Taper | R8 | |
Vertical Travel | 300mm | 11-7/8" |
Spindle Stroke | 120 mm | 4-3/4" |
T-slot | 3 x 14 mm | 1/8" x 9/16" |
Step of Spindle Speeds | 6 | |
Range of Spindle Speeds | 90 - 1920 RPM | |
Head Tilt | 45 degrees left & right | |
Distance from Spindle to Column | 260 mm | 10-1/4" |
Distance from Spindle Nose to Table | 470 mm | 18-1/2" |
Motor | 1.5KW | 2Hp |
Power Requirement | Single Phase 110V 60Hz | |
Rated Current | 10A | |
Packing Size | 57" x 28.3" x 27.5" | |
Net Weight | 540 lbs | |
Gross Weight | 576 lbs |
STANDARD EQUIPMENT:
- Keyless Drill chuck capacity 5/8" with B16 taper
- Drill chuck arbor R8/B16
- Spindle sleeve R8/MT3
- Spindle sleeve MT3/MT2
- 7/16"-20 Drawbar
- Toobox & tools
- Technical documentation